Contact Us

DUFR: Linear Floor Drain

DUFR-TN (Backwall Return Flange Only)

Ideal for curbed or curbless installation with 1/8" to 3/8" thick wall tile.

Size Range 30”, 32”, 34”, 36”, 40”, 42”, 44”, 48”, 54”, 60”, 66”, 72”
Outlet 2-7/16" (61.13mm)
Kit Includes Drain Body; Select Grate; Strainers (2x); Grate Hook

DUFR-TF (Three Side Return Flange)

Ideal for wall-to-wall installation with 1/8" to 3/8" thick wall tile.

Size Range 30”, 32”, 34”, 36”, 40”, 42”, 44”, 48”, 54”, 60”, 66”, 72”
Outlet 2-7/16" (61.13mm)
Kit Includes Drain Body; Select Grate; Strainers (2x); Grate Hook

Description

The DUFR Series of linear drains are designed to meet the classic appeal of the traditional linear drain with the added benefit of close wall installation.

This is achieved with its innovative wall-mounted design, which eliminates the strip of tile between the back wall and the drain, typically requiring bonding the waterproofing or the need to float the finish tile for the same aesthetic appeal.
Installed flush with wall (s) for a clean finished seamless look.

  • Accommodates any size tile format
  • Single slope to drain.
  • Commercial / Residential application 
  • Interior Use
  • Available Tile-in grate to match floor tile
  • Additional grate options available
  • Wide variety of standard sizes
  • Custom sizes available
  • 10 Year Limited Product Warranty
  • Excellent corrosion resistance
  • Shallow V-bottom design for better water flow to the drain outlet 
  • SANS10400 compliant 75mm water seal
  •  Supplied with strainer
  • Textured flange to ensure a tight waterproof membrane seal to the drain body
  • Must be secured to the stud (wall framing). 
  • Installs flush with wall(s) for a clean finish and seamless look.
  • *Full length measured between finish face of the framing* (from Stud to Stud)
  • Suitable substrates: concrete, exterior glue plywood, cement board, cement mortar bed, pre-sloped foam shower pans
  • Easy to clean and maintain
  • System Warranties from main adhesives manufacturers