Contact Us

Super Duty Round – Single Body (8″,12″, & 16″)


By standard, all floor drains and rodding eyes are made of stainless steel: AISI 304, EN 1.4301 and AISI 316L, EN 1.4404. The type of drain depends on the load class, the amount of drained liquid (medium) and design parameters (e.g. ceiling thickness).

Floor drains are made of sheet metal of thickness adapted to a defined type of drain. Our manufacturing equipment allows us to minimize the need for welding through the use of a press-out process; the welding that does occur, is done on the outside of the drain body so that the drain’s hygienic quality is not compromised. The welding is done using argon as a shielding gas, this helps prevent any reaction that could be a problem during the welding process. After the welding process is completed, the weld points are pickled, thus ensuring high quality of joints.